TEL:
+86-13102802206
Email:
fencenetting@china.com
Language
If you’re weighing security, durability, and budget, a coated chain link fence is still the industry’s quiet workhorse. To be honest, it’s not flashy… but it’s reliable, scalable, and surprisingly customizable. The product here—Multiple Scenes Galvanizing/Coating Chain Link Fence from TY Wire Mesh (Anping, China)—leans into that formula with better coating control and tidy finishing.
Three trends keep popping up in bids and RFQs: heavier zinc mass for coastal sites, PVC-coated fabric in team or corporate colors, and anti-climb geometry. TY’s AJW-520Q decorative variant—circle bending at the top—adds a neat anti-climb edge without going full barbed. Many customers say it looks “less aggressive” but still practical.
Origin: No.3 Building, Weier Road 11, Anping County, Hebei, China. Description: decorative wire mesh (garden fence) AJW-520Q with circle-bent top for enhanced anti-climb. Below are typical ranges (real-world use may vary).
| Parameter | Typical Value (≈) |
|---|---|
| Base wire | Low-carbon steel Q195/Q235 |
| Wire diameter (core) | 2.5–4.0 mm |
| Mesh aperture | 50×50 mm (40–60 mm optional) |
| Height | 1.2–3.0 m panels/rolls |
| Zinc coating | 180–275 g/m² (ASTM A392 Class 2, EN 10244-2) |
| PVC coating thickness | 0.8–1.2 mm (ASTM F668) |
| Top edges | Knuckled/Knuckled; Knuckled/Barbed; AJW-520Q circle-bent |
| Tensile strength | ≈380–550 MPa |
| Service life | ≈15–25 yrs inland; 8–15 yrs coastal |
Materials are drawn from low-carbon rod, then woven into diamond mesh. Hot-dip galvanized to ISO 1461 (or pre-galv, depending on spec). PVC coating applied per ASTM F668 with adhesion and bend tests. Final checks: mesh aperture gauge, zinc mass, coating thickness, and salt-spray benchmarks (ASTM B117, 500–1,500 h depending on project level). I like that they log batch numbers—traceability is underrated.
Feedback snippets: “Zero rust after two winters (Midwest).” “Install crew liked the straightness; fewer re-ties.” And from a coastal farm: “Chose heavier zinc; no regrets.”
| Vendor | Coatings | Lead time (≈) | Certs | Notes |
|---|---|---|---|---|
| TY Wire Mesh (Anping) | Hot-dip zinc, PVC (RAL 6005/7016/9005) | 15–28 days | ISO 9001, ASTM/EN conformance | AJW-520Q anti-climb loop top option |
| Vendor B (Regional) | Galv only; powder on posts | 2–4 weeks | ISO 9001 | Good for budget sports perimeters |
| Local Fabricator C | PVC custom colors (limited runs) | 1–2 weeks | — | Fast repairs; higher unit price |
Bottom line: a coated chain link fence is still the best cost-to-coverage play. With proper zinc mass, quality PVC, and honest testing, it holds up—yard after yard.